
- About Us
- Products & Applications
- Ground Supporting Equipments
- Monitoring and Observation
- Infrastructure
- Drone Counter Measures Expert
- Parts
- Air Traffic Management
- Truck
- Snow Plow Truck
- Plow Truck Parts
- Pits Series
- …
- About Us
- Products & Applications
- Ground Supporting Equipments
- Monitoring and Observation
- Infrastructure
- Drone Counter Measures Expert
- Parts
- Air Traffic Management
- Truck
- Snow Plow Truck
- Plow Truck Parts
- Pits Series
- About Us
- Products & Applications
- Ground Supporting Equipments
- Monitoring and Observation
- Infrastructure
- Drone Counter Measures Expert
- Parts
- Air Traffic Management
- Truck
- Snow Plow Truck
- Plow Truck Parts
- Pits Series
- …
- About Us
- Products & Applications
- Ground Supporting Equipments
- Monitoring and Observation
- Infrastructure
- Drone Counter Measures Expert
- Parts
- Air Traffic Management
- Truck
- Snow Plow Truck
- Plow Truck Parts
- Pits Series
Other Plow Truck Parts
SP series spreader (auger type)
1. Wenlong spiral output shaft can accurately control the amount of snow melting agent spread.
2. The discharging end is equipped with a discharging and crushing device.
3. The spreading dose can be set on the LCD screen and does not change with the vehicle speed.
4. Asymmetric spreading will not spread into non-designated areas when lanes change.
5. Install the system (optional).
6. Pre-humidification system (optional).
Technical Parameters
SP0512 / (SP0512S)
Material Tank Capacity (m³): 5
Maximum Spreading Width (m): 12
Spreading Amount (g/m²): 5–100
Optional Pre-Wet Water Tank Capacity (m³): 2.6SP0712 / (SP0712S)
Material Tank Capacity (m³): 7
Maximum Spreading Width (m): 12
Spreading Amount (g/m²): 5–100
Optional Pre-Wet Water Tank Capacity (m³): 2.6SP1012 / (SP1012S)
Material Tank Capacity (m³): 10
Maximum Spreading Width (m): 12
Spreading Amount (g/m²): 5–100
Optional Pre-Wet Water Tank Capacity (m³): 3.6SP1212 / (SP1212S)
Material Tank Capacity (m³): 12
Maximum Spreading Width (m): 12
Spreading Amount (g/m²): 5–100
Optional Pre-Wet Water Tank Capacity (m³): 3.6LP Liquid Spreader
1. Intelligent spraying system enables precise control and adjustment of dosage.
2. Spray the non-win environmentally friendly snow-melting agent with a relatively high unit price in an appropriate amount as needed, which not only meets the requirements of snow removal, but is not wasted and saves usage costs.
3. Reduces corrosion damage to roads, bridges, etc. Save a lot of infrastructure reconstruction and maintenance costs.
Technical Parameters
LP1012 (Extended)
Material Tank Capacity (m³): 10
Maximum Spreading Width (m): 12
Spreading Amount (ml/m²): 20–200LP1412
Material Tank Capacity (m³): 14
Maximum Spreading Width (m): 12
Spreading Amount (ml/m²): 20–200LP1612
Material Tank Capacity (m³): 16.3
Maximum Spreading Width (m): 12
Spreading Amount (ml/m²): 20–200LP1812
Material Tank Capacity (m³): 18.6
Maximum Spreading Width (m): 12
Spreading Amount (ml/m²): 20–200FS roller brush
1. Powerful performance: high speed, large torque, and high power, which can easily clear thin ice and snow. The operation speed is fast and the efficiency is very high. One equipment can be as powerful as two ordinary roller brushes, quickly opening up roads.
2. Intelligent control of speed: The rolling speed is adjusted proportionally with the vehicle speed, and intelligent control ensures the best working effect while reducing fuel consumption and bristle loss.
3. Automatic compensation for period hair wear: the pressure of the bristles on the ground and the grounding chord length can be automatically adjusted. Always ensuring the best snow removal results.
4. Automatic lifting when reversing: When the vehicle is in reverse gear, the roller brush will automatically lift up to avoid tire blowout.
Technical Parameters
FS4390
Sweeping Width (mm): 4300
Sweeping Diameter (mm): 920
Maximum Working Speed (rpm): ≥600
Maximum Angle (°): ≥30FS5411
Sweeping Width (mm): 5400
Sweeping Diameter (mm): 1150
Maximum Working Speed (rpm): ≥500
Maximum Angle (°): ≥30FS6011
Sweeping Width (mm): 6000
Sweeping Diameter (mm): 1150
Maximum Working Speed (rpm): ≥500
Maximum Angle (°): ≥30NS series roller brush
1. The quality is stable and reliable, and the design, material selection, anti-corrosion spraying and manufacturing process have all reached the level of similar foreign products.
2. The roller brush is hydraulically driven by dual motors, with large torque and good snow removal effect. It is controlled by an electro-hydraulic system, and an electronic control operating platform is installed in the cab, which is convenient and fast.
3. The frame structure is made of high-strength alloy materials, which is impact-resistant and fatigue-resistant.
4. The snow shovel and snow shovel can be quickly interchanged, and loading and unloading can be completed in 2-3 minutes.
Technical Parameters
NS3380
Brush Width (mm): 3300
Roller Diameter (mm): 810
Maximum Working Speed (rpm): ≥450
Maximum Tilt Angle (°): >30NS3680
Brush Width (mm): 3600
Roller Diameter (mm): 810
Maximum Working Speed (rpm): ≥450
Maximum Tilt Angle (°): >30XS-E electric driven roller brush
1. Patented product, the first in the industry.
2. Advanced design. Reliable and durable:
3. Easy to install and easy to operate.
4. With large indicator redundancy and high speed range, it can match various new energy municipal sanitation vehicles.
Technical Parameters
XS-E3380
Brush Width (mm): 3300
Roller Diameter (mm): 810
Maximum Working Speed (rpm): ≥300
Maximum Tilt Angle (°): >30XS-E3680
Brush Width (mm): 3600
Roller Diameter (mm): 810
Maximum Working Speed (rpm): ≥300
Maximum Tilt Angle (°): >30XS-D automatic power roller brush
1. The built-in system provides power for the rotation of the hair shaft. At the same time, the lifting and relay functions of the roller are powered by an independent hydraulic system. The auxiliary engine system and the hydraulic system are independent of each other and do not affect each other.
2. The design adopts a central change point after the explosion, and then provides heavy floating support to ensure that it still maintains good contact with the ground when paving the fabric.
3. The control valve adopts threaded repair valve, and the hydraulic valve core adopts imported internationally renowned brands, and also has an over-energy protection system.
Technical Parameters
XS-D3380
Brush Width (mm): 3000
Roller Diameter (mm): 600
Maximum Working Speed (rpm): ≥450
Maximum Tilt Angle (°): >25XS-D3680
Brush Width (mm): 3600
Roller Diameter (mm): 600
Maximum Working Speed (rpm): ≥450
Maximum Tilt Angle (°): >25XS series roller brush
1. The new pin structure has a unique design and adopts a parallel four-bar linkage mechanism to ensure that the new assembly is ultimately parallel to the ground during the lifting and swinging process of the rail.
2. The structure of the unsupported wheel is simple, which improves the useful work and controls the removal rate.
3. Stable full-motion performance, high system pressure, combined with energy circuit control, simple operation, making manual operation convenient and fast.
4. The mechanical structure of the roller brush can automatically follow the shape of the ground, so that the remaining hair is ultimately in parallel contact with the ground, ensuring the continuity and cleaning rate of the ground when needed. At the same time, the life of the roller brush bristles is improved, and the overall economic performance of the equipment is improved.
Technical Parameters
XS3080
Brush Width (mm): 3000
Brush Diameter (mm): 810
Max Working Speed (rpm): 280~400
Max Swing Angle (°): ≥30XS3680
Brush Width (mm): 3600
Brush Diameter (mm): 810
Max Working Speed (rpm): 280~400
Max Swing Angle (°): ≥30ZL series roller brush
1. The word and loader bucket can be quickly changed, and the structure is simple and reliable.
2. Two hydraulic motors are used to drive the chain to rotate the snow machine.
3. Use double-load pneumatic tires, which can rotate and are equipped with self-lubricating bearings.is improved, and the overall economic performance of the equipment is improved.
Technical Parameters
ZL3080
Brush Width (mm): 3000
Brush Diameter (mm): 810
Max Working Speed (rpm): ≥260
Max Swing Angle (°): ≥30ZL3680
Brush Width (mm): 3600
Brush Diameter (mm): 810
Max Working Speed (rpm): ≥260
Max Swing Angle (°): ≥30Get Your Free Quote Now!

Ground Supporting Elements
- Digital Intelligent Inspection
©2024