1. The shovel body is flexibly connected to electrically absorb critical energy.

2. Multiple sets of independent four-bar linkages to improve obstacle avoidance effect

3. Body protection back repair pre-tightening balance control mechanism, automatically presses the material road surface

4. Requires precise pressure adjustment and locking mechanism to clear compaction.

1. It is suitable for high-speed skiing, with operating speeds up to 60+km/h.

2. Clear snow from at least two lanes at one time, greatly improving efficiency.

3. Automatic reset function to prevent overload damage to equipment.

4. All actions can be operated inside, which is convenient, safe and reliable.

1. The upper removal requires an independent hydraulic system. The hydraulic unit takes power.

2. Clear snow from at least two lanes at one time, greatly improving efficiency.

3. Automatic reset function to prevent overload damage to equipment.

4. It has three stages of obstacle avoidance functions.

5. May Snow has lifting and steering functions, which can be completed indoors.

1. Both the board and the art are made of special materials with good wear resistance and durability.

2. Wave pressure system control, equipped with pressure regulator to maintain ground pressure

3. Installed in the middle of the front and rear axles, it has automatic obstacle avoidance and reset function. Prevent overload damage.

4. Chen Bing's steering, lifting, etc. are all controlled by electro-hydraulic. Driving in Beijing is controlled, safe and reliable.

1. High-strength structural steel materials and special reinforced structures improve its strength.

2. Independent hydraulic control, hydraulic pushing and lifting operation level 12.

3. Automatic reset function to protect equipment.

4. Quick connection device, easy to install and remove.

1. The eight icebreaker wheels vibrate out of phase to avoid resonance.

2. The prime mover and impact energy can be adjusted intelligently. to accommodate different thicknesses. The temperature is thick and frozen. 3. Installed on the front end of the vehicle, it can be interchanged with mud shovels and snow shovels.

4. De-icing steering, lifting, etc. are all controlled by electro-hydraulic. In-cab control makes safety possible.

1. The ice wheel adopts the form of toothed spiral combination, which has high ice building efficiency, and while efficiently breaking the ice, the ice cubes are quickly sent to the vehicle (right).

2. Intelligent control: Equipped with pressure and displacement sensors, which can be adjusted through automatic recognition of parameters. Closed loop control, control list.

3. The ice-breaking iron teeth can regulate the pressure of the ice suit and will not cause damage.

4. The ice wheel can be quickly lowered. It can be lifted quickly when encountering obstacles and has an automatic reset function.

5. My ice wheel swings from side to side. Adaptive road surface function.

1. The high-strength spiral cast steel design can break ice. The ice blade of the ice wheel has high strength, and the opposite ice layer has sufficient thermal pressure kinetic conductivity.

2. The ice-breaking wheel can self-balance and swing like the central rotating shaft to adapt to the slope of the wine surface. At the same time, the air-reducing needles placed on both sides can adjust the horizontal gap from the map, thereby achieving the water-breaking effect of the lock. 3. The combined action of the hydraulic cylinder accumulator can prevent the road surface from being uneven. When the pressure of the ice-breaking wheel cutting into the ice layer can be ensured to be stable, the ice-covered effect of the equipment will be further enhanced.

4. Quick connection device, easy to install and remove.