• Airfield Ground Lighting System

    • 8-Inch Inset Light Series
    • 12-Inch Inset Light Series
    • Elevated Light Series (PAPI)
    • Sequential Flashing Lights
    • Isolation Transformer
    • Taxiway Guide Sign (Fluorescent Type)
    • Wind Cone
    • Elevated Taxiway LED Light
    • Elevated LED Obstacle Light

  • Runway Status Lighting System

  • The Runway Status Lighting System (RWSL) is an autonomous early warning system designed to prevent runway incursions. The system monitors conflicts involving aircraft and vehicles on the runway in real time. By controlling the Takeoff Holding Lights (THL) embedded on the runway and the Runway Entry Lights (REL) at the entrance, it enhances situational awareness for pilots and vehicle drivers using the runway.

    When a runway incursion event is detected, either the takeoff holding light or the runway entry light will automatically turn red, providing a direct and immediate warning to the pilot and vehicle driver. This allows them to take swift action to prevent runway incursion events, thereby improving the safety of airport operations.

  • Features

    • Management Capacity: Hundreds of front-end terminals
    • Apron Layout: Graphic display of stand status
    • Remote Control: Control of the front-end terminal and manual guidance
    • Redundant Design: Automatic main-backup switch in case of failure
    • Real-Time Video Monitoring: Complete docking procedure record
    • Interface to AODB: For analyzing and distributing flight and stand information; enables upload of block-on/off information
    • Connectable to Clock System: Via NTP
    • Multi-Level Access Authority Management
    • Complete Logging

    Specifications

    • The delay for turning on/off the Takeoff Holding Lights (THL) and Runway Entry Lights (REL) is less than 2 seconds.
    • Simultaneously controls no fewer than 60 sets of runway entry lights, 20 sets of takeoff holding lights, and 10 runways.
    • System capacity is no less than 400 aircraft and vehicles.
    • The update rate reported by the system for each target is no greater than 1 second.
    • Working Temperature: -40°C ~ +10°C
    • Working Humidity: 10% RH ~ 95% RH

  • Get Your Free Quote Now!

Cookie Use
We use cookies to ensure a smooth browsing experience. By continuing we assume you accept the use of cookies.
Learn More